特点概述:
• 全隔离手持示波表,示波器通道间完全隔离,示波器和万用表通道隔离,示波器、万用表与USB等通讯接口之间完全隔离,隔离等级:1000V CATII,600V CATIII.
• High Bandwidth 60MHz-200MHz Oscilloscope,1GS/s sample rate, and 6000 Counts DMM with analog bargraph , and data recorder.
•
• High Refresh Rate (2500 frames)
• Large 5.6 inch TFT Color LCD Display,High Resolution(640*480), Dual-Window Design --More clear, More Detailed
• One-touch automatic setup optimizes the position, range, timebase, and triggering to assure a stable display of virtually any waveform
• Easy-to-use pop-up menu with built-in multi-language help system
• 32 Automatic Measurements
• Waveform Math: Add, Subtract, Multiply, and Divide
• Store and recall over
• Automatic cursor tracking measurements
• XY Mode
• Built-in FFT function converts a time-domain signal into its frequency components to measure harmonic content and distortion in systems
• Waveform Recorder to capture/replay input waveforms from CH1 and CH2 with a maximum record length of 1000 frames
• Pass-Fail function compares a stored waveform to an unknown input
• Average Mode for smoothing waveforms
• Square Wave Output (2V, 1kHz) for probe adjustment
• USB Host/Device 2.0 full-speed interface ,support removeable disk, LAN Optional ,Easy to control by PC or long-distance.
• Dimensions (mm):240(L)x165(W)x50(H), be carried easily.
技术指标:
Model |
DSO1202S |
DSO1122S |
DSO1062S |
示波器模式 |
|||
模拟带宽 |
200MHz |
120MHz |
60MHz |
实时采样率 |
1GSa/s |
||
等效采样率 |
25GSa/s |
||
存储深度 |
单通道*大2M存储深度,双通道1M,另有双通道4K、40K、512K可选 |
||
时基范围 |
2nS/div-2000S/div(以2-4-8方式步进) |
||
通道间延迟 |
500ps |
||
垂直系统 |
|||
AD转换器 |
8bit分辩率,两通道同时采集 |
||
垂直灵敏度(V/div) |
2mV/div~5V/div(在BNC输入处) |
||
垂直位移范围 |
±50V(5V/div),±40V(2V/div~500mV/div), |
||
触发 |
|||
触发灵敏度(边沿触发类型) |
直流:CH1/CH2(典型值)从直流到10MHz为1格,从10MHz到*大带宽为1.5格 |
||
触发电平范围 |
内部(ch1、ch2):距显示屏中心±8div |
||
触发电平**度(典型的)适用于上升和下降时间≥20ns |
内部(ch1、ch2):±(0.3div×V/div)(距屏幕中心±4div范围内) |
||
触发释抑范围 |
100ns-10s |
||
触发类型 |
|||
边沿触发 |
上升沿,下降沿 |
||
脉宽触发 |
触发模式:(大于、小于、等于、不等于)正脉宽,(大于、小于、等于、不等于)负脉宽;脉冲宽度范围:20nS-10S |
||
视频触发 |
信号制式:支持标准的NTSC、PAL和SECAM广播制式; |
||
斜率触 |
触发模式:(大于、小于、等于、不等于)正斜率,(大于、小于、等于、不等于)负斜率;设置时间:20nS–10S |
||
超时触发 |
起始沿:上升沿,下降沿;设置时间:20ns-10s |
||
交替触发 |
内部触发:边沿、脉宽、视频、斜率 |
||